Baro Sensor problem

Anything else technical related in here...

Moderator: snoopyjon

Baro Sensor problem

Postby Kizior » Tue Feb 10, 2015 11:41 am

I've got a Baro Sensor problem in my SP1. There's one about 1 second long FI lamp flash when I check for errors so it's error no 10. I've checked voltages on the sensor and they'se OK. I've replaced the baro sensor to another one and I was ok for about 5 minutes. No 10 error came back. Somebody can help ?
--
Regards Piotr
Kizior
 
Posts: 14
Joined: Tue Feb 10, 2015 10:03 am
Location: Poland

Re: Baro Sensor problem

Postby sparkysp2 » Tue Feb 10, 2015 7:55 pm

Have you cleared the error code ..
Always keep it black side down and shiney side up....
User avatar
sparkysp2
 
Posts: 416
Joined: Sat Jun 18, 2011 8:53 am
Location: Hampshire

Re: Baro Sensor problem

Postby Kizior » Thu Feb 12, 2015 7:47 am

Yes. And it shows again.
--
Regards Piotr
Kizior
 
Posts: 14
Joined: Tue Feb 10, 2015 10:03 am
Location: Poland

Re: Baro Sensor problem

Postby Kizior » Tue Feb 16, 2016 12:20 pm

It was caused by leaking fuel pressure regulator and vacuum loss (for information)
--
Regards Piotr
Kizior
 
Posts: 14
Joined: Tue Feb 10, 2015 10:03 am
Location: Poland

Re: Baro Sensor problem

Postby Wyvern971 » Mon Mar 14, 2016 2:35 pm

Kizior wrote:It was caused by leaking fuel pressure regulator and vacuum loss (for information)


Thanks for the update :)

Out of interest, how did you figure it out?
Wyvern971
 
Posts: 277
Joined: Fri Feb 25, 2011 4:16 pm
Location: London


Return to Other

Who is online

Users browsing this forum: No registered users and 2 guests