HondaVTRSP.com

Posted: **Tue May 31, 2011 8:21 pm**

Hello All

Looking for help with a little project im about to start.
As the subject suggest's im going to try and de-Baffle my factory fitted cans on my SP1.
if anyone has already had a go at this insane idea can you let me know your results etc

Cheers :think:

Posted: **Tue May 31, 2011 8:36 pm**

I really wouldn't do that.

The original cans are expensive to replace, IMO you should keep an eye on eBay for another set

Posted: **Tue May 31, 2011 9:38 pm**

I believe cheekykev has done it... Hopefully he'll be along soon to explain

Posted: **Wed Jun 01, 2011 8:04 pm**

Wyvern971 wrote:I really wouldn't do that.

The original cans are expensive to replace, IMO you should keep an eye on eBay for another set

thought of that Wyvern :-)

bought a pair off flea bay already.....there in better nic than mine :-)

Posted: **Wed Jun 01, 2011 8:07 pm**

snoopyjon wrote:I believe cheekykev has done it... Hopefully he'll be along soon to explain

I've messaged kev already snoopyjon but he has not replied yet.

Posted: **Thu Jun 02, 2011 7:11 am**

A few of the Guys on the Firestorm site have done it with theirs.
They got a small improvement, sound-wise, mainly down the bottom end when pulling away. It wasn't enough for most so they then went on and started looking for some proper (loud) aftermarket ones. Actually I think it spurred them on to get them sooner

Give it a go and let us know what you think :thumbup:

Pete

Posted: **Fri Jun 10, 2011 10:24 pm**

Cheers sppete

very informative...... with pics aswell :-)

HondaVTRSP.com

De-baffling my originals

De-baffling my originals

Re: De-baffling my originals

Re: De-baffling my originals

Re: De-baffling my originals

Re: De-baffling my originals

Re: De-baffling my originals

Re: De-baffling my originals