After removing the right silencer (aftermarket) due to removing the swingarm etc to check the bearings, i refitted the silencer and the damn thing isn’t quite level or the same distance away from the rear number plate (used as a reference) as the left one. It was difficult to remove as there was a lot of twisting and pulling involved to remove it due to the gasket in the link pipe to give the perfect seal.
Now have to loosen the silencer from the link pipe as well to twist it back to get it level and maybe a couple of spacers on the rear footrest to bring it out slightly.
Again what a pain in the arse this is turning out to be
