HondaVTRSP.com

Anyone have that little bracket that goes on the collector of the Akrapovic full system, to secure it to the frame?
Never seen it, and Im using one I made from scrap aluminium, and it aint pretty...

Here's photo of it from my system.
BTW the SP2 oil cooler mounting rubber fits into the larger hole at the pipe, and is more substantial than the one supplied by Akrapovic.
Also, watch that lower mounting bolt. Mine sheared off and allowed the system to shift right, causing the left muffler to rub against the swingarm, which then wore a hole through the carbon and polished a flat spot on the swingarm.

Thanks, looks pretty simple, much like the one Ive made myself
Thought they might have made something bend or similar.