Anyone have that little bracket that goes on the collector of the Akrapovic full system, to secure it to the frame?
Never seen it, and Im using one I made from scrap aluminium, and it aint pretty...
Bracket for Akrapovic Full System
Moderator: snoopyjon
3 posts
• Page 1 of 1
Bracket for Akrapovic Full System
by hanberg » Mon Apr 29, 2013 7:44 am
- hanberg
- Posts: 226
- Joined: Mon Jul 04, 2011 4:56 pm
Re: Bracket for Akrapovic Full System
by SubSailor » Wed Jun 26, 2013 1:52 am
Here's photo of it from my system.
BTW the SP2 oil cooler mounting rubber fits into the larger hole at the pipe, and is more substantial than the one supplied by Akrapovic.
Also, watch that lower mounting bolt. Mine sheared off and allowed the system to shift right, causing the left muffler to rub against the swingarm, which then wore a hole through the carbon and polished a flat spot on the swingarm.
BTW the SP2 oil cooler mounting rubber fits into the larger hole at the pipe, and is more substantial than the one supplied by Akrapovic.
Also, watch that lower mounting bolt. Mine sheared off and allowed the system to shift right, causing the left muffler to rub against the swingarm, which then wore a hole through the carbon and polished a flat spot on the swingarm.
Last edited by SubSailor on Wed Jun 26, 2013 6:30 pm, edited 1 time in total.
- SubSailor
- Posts: 107
- Joined: Sun Jan 30, 2011 6:58 am
- Location: Sarasota, Florida USA
Re: Bracket for Akrapovic Full System
by hanberg » Wed Jun 26, 2013 11:09 am
Thanks, looks pretty simple, much like the one Ive made myself 
Thought they might have made something bend or similar.
Thought they might have made something bend or similar.
- hanberg
- Posts: 226
- Joined: Mon Jul 04, 2011 4:56 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests