HondaVTRSP.com

After some advice please. I`ve done the PAIR block off mod on the new engine and removed the hoses and other gubbins. The snorkel has also had the flapper mod done previously with the flap etc removed completely. Has someone got a simple (read idiot) guide on what else is surplus to requirements with these mods done eg canister at the front of the engine by the front coil for one.
Any help/links/pictures gratefully received.
Cheers
Tim

Did a bit of searching and found this in case it helps anyone else.

http://www.rc51.org/valve.htm

Along with this from my earlier PAIR mod post

http://www.rc51.org/pair.htm

Thats where i got my info from

Thats guide is what I used, pretty straight forward.